Ubiquiti EdgeSwitch ES-24-250W Administration Manual page 90

EdgeSwitch Administration Guide
™
Field
Reporting Methods
Rule Id
Time Range
Match Conditions
Interfaces
When you click Add, the Time Based Flow Configuration dialog box opens and allows you to configure a rule for traffic flow statistics.
The match conditions are optional, but the rule must specify at least one match condition. The match conditions are as follows:
Match All
Source IP
Destination IP
Source MAC
Destination MAC
Source TCP Port
Destination TCP Port
Source UDP Port
Destination UDP Port
Use the buttons to perform the following tasks:
• To add a rule and define criteria for flow-based statistics that are collected within a time range, click Add.
In the Time Based Flow Configuration dialog box, configure the settings, and then click Submit to apply
the changes.
• To delete one or more flow-based rules for time-based statistics, select each entry to delete and click
Remove.
• Click Refresh to refresh the data on the screen with the present state of the data in the switch.
To retain the changes across the switch's next power cycle, click System > Configuration Storage > Save.
Ubiquiti Networks, Inc.
Time-Based Flow Statistics Fields
Description
The methods for reporting the collected statistics at the end of every configured interval:
• None The statistics are not reported to the console or an external server. They can be viewed only
by using the EdgeSwitch UI or by issuing a CLI command.
• Console The statistics are displayed on the console.
• E-Mail The statistics are sent to an e-mail address. The SNTP server and e-mail address
information is configured by using the appropriate Email Alerts pages.
• Syslog The statistics are sent to a remote syslog server. The syslog server information is
configured on the Logging Hosts page.
To change the reporting methods for all flow-based statistics rules, click this button and select
one or more methods.
Click this button to reset the field to the default value.
The number that identifies the flow-based statistics collection rule.
The name of the periodic or absolute time range to use for data collection. The time range is configured
using the Time Range Entry Summary page (see "Time Range Entry Configuration" on page 111).
The time range must be configured on the system before the time-based statistics can be collected.
The criteria that a packet must meet to match the rule.
The interface or interfaces on which the flow-based rule is applied. Only traffic on the specified
interfaces is checked against the rule.
Select this option to indicate that all traffic matches the rule and is counted in the statistics. This
option is exclusive to all other match criteria, so if Match All is selected, no other match criteria can be
configured.
The source IP address to match in the IPv4 packet header.
The destination IP address to match in the IPv4 packet header.
The source MAC address to match in the ingress frame header.
The destination MAC address to match in the ingress frame header.
The TCP source port to match in the TCP header.
The TCP destination port to match in the TCP header.
The UDP source port to match in the UDP header.
The UDP destination port to match in the UDP header.
Configuring System Information
89