EdgeSwitch CLI Command Reference
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value .
no sntp unicast client poll-interval
Format
Mode
Global Config
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30 .
Default
5
sntp unicast client poll-timeout poll-timeout
Format
Mode
Global Config
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value .
no sntp unicast client poll-timeout
Format
Mode
Global Config
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10 .
Default
1
sntp unicast client poll-retry poll-retry
Format
Mode
Global Config
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value .
no sntp unicast client poll-retry
Format
Mode
Global Config
sntp server
This command configures an SNTP server (a maximum of three) . The server address can be either an IPv4 address
or an IPv6 address . The optional
port-id
a value of 1-65535 .
sntp server {ipaddress | ipv6address | hostname} [priority [version [port-id]]]
Format
Mode
Global Config
no sntp server
This command deletes an server from the configured SNTP servers .
no sntp server remove {ipaddress | ipv6address | hostname}
Format
Mode
Global Config
Ubiquiti Networks, Inc.
priority
can be a value of 1-3, the
Utility Commands
version
a value of 1-4, and the
145