Rear Brake Pad Service; Pad Removal - Polaris RANGER ETX 2015 Owner's Manual

BRAKE SYSTEM

REAR BRAKE PAD SERVICE

PAD REMOVAL

1. Elevate and support rear of machine.
CAUTION
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur if machine tips or falls.
2. Remove the rear wheel. Loosen pad adjuster screw
q
2-3 turns.
3. Clean caliper area before removal.
4. Remove caliper mounting bolts
of disc.
CAUTION
When removing caliper, be careful not to damage brake
line. Support caliper so as not to kink or bend brake
9.28
w
and lift caliper off
line.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
5. Push caliper piston into caliper bore slowly with pads
installed.
Brake fluid will be forced through compensating port
into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.
6. Remove the brake pads.
NOTE
© Copyright Polaris Industries Inc.