BRAKE SYSTEM
REAR BRAKE PAD SERVICE
PAD REMOVAL
1. Elevate and support rear of machine.
WARNING
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur if machine tips or falls.
2. Remove the rear wheel. Loosen the pad adjuster
screw 2-3 turns.
3. Clean caliper area before removal.
4. Remove caliper mounting bolts and lift caliper off of
disc.
NOTICE
When removing caliper, be careful not to damage brake
line. Support caliper so as not to kink or bend brake
9.22
line.
5. Push caliper piston into caliper bore slowly with pads
installed.
Brake fluid will be forced through compensating port
into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.
6. Remove the brake pads from the caliper.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
NOTICE
© Copyright Polaris Industries Inc.