Front Gearcase Installation - Polaris RANGER 1000 2020 Service Manual

FINAL DRIVE
12. Carefully install the LH output hub assembly
the cover plate. Take care not to damage the new
cover plate seal while installing the output hub.
13. Install the output cover assembly
gearcase housing. Install the seven cover plate
s
screws and torque to specification.
TORQUE
Front Gearcase Cover Plate Screws:
9 ft-lbs (12 N·m)
8.26

FRONT GEARCASE INSTALLATION

o
into
1. Install the gearcase between the left-hand upper and
a
onto the
2. Install the vent line on the gearcase and ensure it's
3. Install the propshaft onto the front gearcase.
4. Install new gearcase mounting bolts
lower control arms into the frame.
routed properly.
specification.
TORQUE
Front Gearcase Mounting Bolts:
30 ft-lbs (41 Nm)
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
q
and torque to
© Copyright Polaris Inc.