Shocks / Springs; Front Shock Removal / Installation; Rear Shock Removal / Installation - Polaris ACE 900 2017 Service Manual

STEERING / SUSPENSION

SHOCKS / SPRINGS

FRONT SHOCK REMOVAL / INSTALLATION

1. Elevate the vehicle off the ground to relieve the
suspension load.
2. Support under A-arm.
3. Remove the upper and lower fasteners
the shock and remove the shock
Discard nuts and replace with new upon installation.
4. Reverse the procedure to reinstall the shock. Torque
new fasteners to specification.
TORQUE
Shock Mounting Bolts:
42 ft-lbs (57 Nm)
8.36

REAR SHOCK REMOVAL / INSTALLATION

1. Elevate the vehicle off the ground to relieve the
2. Support under control arm.
q
retaining 3. Remove the hose clamps
w
from the vehicle.
4. Remove the upper and lower fasteners
5. Reverse the procedure to reinstall the shock. Torque
suspension load.
reservoir to the upper control arm.
the shock and remove the shock
Discard nuts and replace with new upon installation.
new fasteners to specification.
TORQUE
Shock Mounting Bolts:
42 ft-lbs (57 Nm)
9929422 R02 - 2017-2019 ACE 900 Service Manual
q
retaining the shock
w
retaining
e
from the vehicle.
© Copyright Polaris Industries Inc.