Special Text Markings; Descriptions Of Originals And Paper - Oce CS193 User Manual

Introduction

Special text markings

[Stop] key
The names of keys on the control panel are written as shown above.
MACHINE SETTING
Display texts are written as shown above.
Note
The machine illustrations shown in this manual can vary and depend on the machine configuration.
1.3

Descriptions of originals and paper

The descriptions used in this manual for originals and paper are explained below.
Whenever original and paper dimensions are mentioned in this
manual, the value shown as Y in the illustration refers to the width,
and the value shown as X refers to the length.
Lengthwise (w)
If the width (Y) of the paper is shorter than the length (X), the paper
has a vertical or portrait orientation, indicated by w.
Crosswise (v)
If the width (Y) of the paper is longer than the length (X), the paper
has a horizontal or landscape orientation, indicated by v.
CS193/CS173/CS163
1
1-11