Selecting The Paper Settings; To Automatically Detect The Paper Size ("Auto Paper Select" Setting) - Oce cm4520 User Manual

Copy Paper/Original Documents
7.2

Selecting the Paper Settings

This section describes the procedures for specifying the size and type of pa-
per loaded in each paper drawer.
!
Detail
For details on loading the paper into the 1st drawer, refer to "Loading Pa-
per into the 1st Drawer" on page 2-46.
For details on loading the paper into the bypass tray, refer to "Loading
Paper into the Bypass Tray" on page 2-57.

To automatically detect the paper size ("Auto Paper Select" setting)

The size of the paper loaded into the 1st drawer and the bypass tray can be
detected automatically.
The following procedure describes how to specify the setting for automati-
cally detecting the paper loaded into the 1st drawer.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
cm4520
7
7-9