Selecting The Paper Settings; Automatically Detecting The Paper Size ("Auto Detect" Setting) - Oce cm3522 User Manual

Copy paper/originals
6.2

Selecting the Paper settings

This section describes the procedures for specifying the size and type of paper loaded in each paper tray.
!
Detail
For details on loading the paper into tray 1/2/3/4, refer to
page 1-41.
For details on loading the paper into the bypass tray, refer to
on page
6.2.1

Automatically detecting the paper size ("Auto Detect" setting)

The size of the paper loaded into tray 1/2/3/4 and the bypass tray can be detected automatically.
The following procedure describes how to specify the setting for automatically detecting the paper loaded
into tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for tray 1.
– To select the automatic paper detection setting for tray 2/3/4 or the bypass tray, touch the button
for the corresponding paper tray.
3
Touch [Change Tray Settings].
Océ cm3522/cm2522
1-45.
"Loading paper into tray 1/2/3/4" on
"Loading paper into the bypass tray"
6
6-6