Paper Storage; Auto Tray Switch Feature; Order For Selecting Paper Trays - Oce cm3522 User Manual

Copy paper/originals
6.1.5

Paper storage

Store paper in a cool, dark location with little humidity.
If the paper becomes damp, paper misfeeds may occur.
Paper that has not been loaded should be kept wrapped or placed in a plastic bag and stored in a cool, dark
location with little humidity.
Store the paper laying flat, not standing on its edge. Curled paper may cause paper misfeeds.
Keep paper out of the reach of children.
6.1.6

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded
with paper meeting the following conditions, the other paper tray is automatically selected so printing can
continue. If the optional LCT is installed, a maximum of 3,650 copies (with 8-1/2 × 11 v paper) can be made
continuously. (The paper tray is automatically switched only if the "Auto Tray Switch ON/OFF" parameter in
the Utility mode is set to "Allow".)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- The paper trays are selected when the paper tray is automatically switched.
!
Detail
For details on the specifying the paper trays that are selected when the paper tray is automatically
switched, refer to
6.1.7

Order for selecting paper trays

As a factory default, when a different paper tray is automatically selected, the next paper tray in the following
list is chosen.
Tray 1 → Tray 2 → Tray 3*
1
* Appears only when the optional paper feed cabinet is installed.
2
* Appears only when the optional LCT is installed.
!
Detail
To change the order in which the paper trays are selected, refer to
Océ cm3522/cm2522
"System Settings" on page
1 → Tray 4* 1 → LCT* 2 → Bypass tray
11-23.
"System Settings" on page
6
11-23.
6-5