Tray Auto Select Setting - Oce CS520 User Manual

[11] Tray Auto Select Setting

[11] Tray Auto Select Setting

Select whether the tray size setting will be detected or not detected when ATS/APS
functions. If you select it to be detected, you may also select the priority of the
detection for each tray.
Key Operator Mode Screen 1
Procedure
1 Touch [11] Tray auto select setting
Screen.
2 On the left half of the screen, touch to highlight each tray key, then select
ON to specify whether the selected tray is to be automatically detected or not
when ATS/APS functions.
Tray keys specified as ATS/APS ON will appear on the right half of the screen.
3 Specify the priority of the trays. Touch to highlight the desired tray key, then
change its priority by using Up + and Down , arrow keys.
4 Touch OK to complete the setting and restore the Key Operator Mode Screen, or
CANCEL
touch
14-434
to restore the previous setting.
Key Operator Mode Screen 2
Tray Auto Select Setting Screen
to display the Tray Auto Select Setting
OFF or