1. Manuals
  2. Brands
  3. Oce Manuals
  4. All in One Printer
  5. cx2100
  6. Quick setup manual

Oce cx2100 Quick Setup Manual

Printer
Hide thumbs Also See for cx2100:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Printing for
Professionals
Océ
cx2100
Quick
Setup Guide

Advertisement

Table of Contents
loading

Related Manuals for Oce cx2100

Summary of Contents for Oce cx2100

  • Page 1 Océ cx2100 Printing for Professionals Quick Setup Guide...

  • Page 2: Symbols Used In This Guide

    Symbols used in this guide Caution Improper Setup Warning Warnings tell you what to do to prevent Cautions specify procedures you must Improper Setup icons alert you to possible personal injury. follow or avoid to prevent possible devices and operations that are not damage to the machine or other objects.

  • Page 3: Table Of Contents

    Table of Contents Getting Started Carton components ............................2 Control panel..............................3 STEP 1 – Setting Up the Machine Remove the packing materials from the machine ..................4 Installing the toner cartridges ........................5 Load paper in the paper tray ........................5 Release the Scanner Lock ...........................

  • Page 4: Getting Started

    Getting Started Carton components Carton components may vary from one country to another. Save all packing materials and the printer carton in case for any reason you must ship your printer. 1 Automatic Document Feeder (ADF) 7 Power Switch 2 Control Panel 8 ADF Document Output Support Flap 3 Front Cover Release Button 9 Document Cover...

  • Page 5: Control Panel

    Getting Started Control panel cx2100 05/01/2008 18:00 Fax Only Sleep 1 One Touch keys 7 Start keys 2 LCD (Liquid Crystal Display) 8 Copy keys 3 Status LED 9 Duplex key 4 Menu keys 10 Mode keys 5 Dial Pad...

  • Page 6: Step 1 Setting Up The Machine

    STEP 1 Setting Up the Machine Hold the green handle of the drum unit. Lift the Remove the packing drum unit up and then pull it out until it stops. materials from the machine Important Save all packing materials and the carton in case you have to ship your machine.

  • Page 7: Installing The Toner Cartridges

    Setting Up the Machine Repeat steps 1 through 3 for the remaining Installing the toner toner cartridges. cartridges Put the drum unit back into the machine. Unpack the toner cartridges and rock each toner cartridge from side to side 5 to 6 times. Close the front cover of the machine.

  • Page 8: Release The Scanner Lock

    STEP 1 Setting Up the Machine While pressing the green paper-guide release Release the Scanner Lock lever (1), slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots. Push the lever (1) in the direction to unlock the scanner.

  • Page 9: Setting The Date And Time

    Setting Up the Machine Connect one end of the telephone line cord to Note the jack on the machine marked LINE and the If you are sharing one phone line with an external other end to a modular wall jack. telephone answering device, connect it as shown below.

  • Page 10: Setting Your Station Id

    STEP 1 Setting Up the Machine Enter the two digits for the day on the dial pad, Enter your telephone number (up to 20 digits) on the dial pad, and then press OK.(If your and then press OK. telephone number and fax number are the same, enter the same number again.) 02.Date&Time 03/XX/2008...

  • Page 11: Choosing The Correct Receive Mode

    Will you be using Voicemail on the same telephone line as your cx2100? If you have Voicemail on the same telephone line as your cx2100, there is a strong possibility that Voice mail and the cx2100 will conflict with each other when receiving incoming calls. See Voice Mail in Chapter 7 of the User's Guide for instructions on setting up your machine using this service.

  • Page 12: Tone And Pulse Dialing Mode

    STEP 1 Setting Up the Machine Press Menu. Dial Prefix Press 0. The dial prefix setting will automatically dial a Press 1. predefined number before every fax number you dial. For example: If your phone system requires a 9 to dial Press to select the mode.

  • Page 13: Selecting Your Language

    Setting Up the Machine Selecting your language Press Menu. Press 0. Press 0. Select your language (English or French) by using and then press OK. Press Stop/Exit. Setting the LCD contrast You can change the contrast to help the LCD look lighter or darker.
  • Page 14 You can install Presto! PageManager to add OCR details). capability to the ControlCenter2 and easily scan, Oce Imagistics Support share and organize photos and documents. You can access the Océ Home page. Utilities Repair Multi-Function Suite (For USB users You can find the following additional Utilities from this only) folder.

  • Page 15: Step 2 Installing The Driver & Software

    STEP 2 Installing the Driver & Software Follow the instructions on this page for your operating system and interface. For the latest drivers, documentation, and to find the best solution for your problem, access the Océ USA web site at http://www.oceusa.com.

  • Page 16: Windows

    STEP 2 Installing the Driver & Software ® Windows ® For USB Interface Cable Users (For Windows 2000 ® Professional/XP/ XP Professional x64 Edition/Windows Vista The CD-ROM main menu will appear.Click Important Install Multi-Function Suite. Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11.
  • Page 17 Installing the Driver & Software ® Windows After reading and accepting the ScanSoft™ When this screen appears, connect the USB PaperPort™ 11SE License Agreement, click interface cable to your PC, and then connect it Yes. to the machine. The installation of ScanSoft™ PaperPort™ 11SE will automatically start and is followed by the installation of Multi-Function Suite.
  • Page 18 STEP 2 Installing the Driver & Software ® Windows When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Click Finish to restart your computer. ( You must be logged on with Administrator rights.) The Multi-Function Suite (including printer driver and scanner driver) has been installed and the installation is now complete.

  • Page 19: For Wired Network Interface Users

    Installing the Driver & Software ® Windows ® For Wired Network Interface Users (For Windows 2000 ® Professional/XP/ XP Professional x64 Edition/Windows Vista Put the supplied CD-ROM into your CD-ROM Important drive. If the model name screen appears, Make sure that you have finished the choose your machine.
  • Page 20 STEP 2 Installing the Driver & Software ® Windows Choose Wired Network Connection If the machine is configured for your network, (Ethernet), and then click Next. choose the machine from the list, and then click Next. This window will not appear if there is only one machine connected on the network, it will be chosen automatically.
  • Page 21 Installing the Driver & Software ® Windows When the Océ and ScanSoft on-line Note Registration screen is displayed, make your • Multi-Function Suite includes the Network Printer selection and follow the on-screen instructions. Driver, Network Scanner Driver, ControlCenter3, ® ScanSoft™ PaperPort™ 11SE and True Type fonts.

  • Page 22: Firewall Settings

    STEP 2 Installing the Driver & Software ® Windows 5 Click the Add button. Firewall settings 6 Add port 54926 for Network PC-Fax by entering the information below: Firewall settings on your PC may reject the necessary network connection for Network Scanning and PC- 1.
  • Page 23 Installing the Driver & Software ® Windows 6 To add port 54925 for network scanning, enter ® For Windows Vista users: the information below: 1 Click the Start button, Control Panel, Network and Internet, Windows Firewall 1. In Name: Enter any description, for example and click change settings.

  • Page 24: For Wireless Network Interface Users In Infrastructure Mode

    Multi-Function Suite. The following steps will guide you through the configuration and installation process. To achieve optimum results with normal every day document printing, place the cx2100 as close to the network access point (router) as possible with minimal obstructions. Large objects and walls between the two devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
  • Page 25 Installing the Driver & Software ® Windows Confirm your network environment The setup process will be different depending on your network environment. Installation using SecureEasySetup™ . If your wireless access point (A) supports SecureEasySetup™ , you do not need to use a computer to configure the machine.

  • Page 26: Using The Secureeasysetup™ Software To Configure Your Machine For A Wireless Network

    (LAN) settings before you can configure the wireless settings again. Press Menu, 7, 2, 5 (or Menu, 7, 0) and then press 1 to accept the change. Place the cx2100 close to the SecureEasySetup™ router or access point .

  • Page 27: Using The Setup Wizard From The Control Panel Lan Menu For Wireless Network Configuration

    Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11. These instructions will install your cx2100 in a typical Before you begin you must know your wireless small office or home wireless network environment in network settings.
  • Page 28 STEP 2 Installing the Driver & Software ® Windows Plug the AC power cord into an AC outlet. Turn Select <New SSID> using and press the power switch on. OK. Go to step 6. 72.WLAN SSID <New SSID> Improper Setup Select ab or OK If you have previously configured the wireless settings of the machine you must reset the...
  • Page 29 Installing the Driver & Software ® Windows Choose the appropriate key number and Your machine will now try to connect to your press OK. wireless network using the information you have entered. If successful, Connected will 72.WLAN appear briefly on the LCD. WEP key Connection NG is displayed when the print KEY1:...
  • Page 30 STEP 2 Installing the Driver & Software ® Windows Put the supplied CD-ROM into your CD-ROM Note drive. If the model name screen appears, If you want to install the PS driver (BR-Script choose your machine. If the language screen Driver), choose Custom Install and then follow appears, choose your language.
  • Page 31 Installing the Driver & Software ® Windows If the machine is configured for your network, When the Océ and ScanSoft on-line choose the machine from the list, and then click Registration screen is displayed, make your Next. This window will not appear if there is selection and follow the on-screen instructions.

  • Page 32: Firewall Settings

    STEP 2 Installing the Driver & Software ® Windows 5 Click the Add button. Firewall settings 6 Add port 54926 for Network PC-Fax by entering the information below: Firewall settings on your PC may reject the necessary network connection for Network Scanning and PC- 1.
  • Page 33 Installing the Driver & Software ® Windows 6 To add port 54925 for network scanning, enter ® For Windows Vista users: the information below: 1 Click the Start button, Control Panel, Network and Internet, Windows Firewall 1. In Name: Enter any description, for example and click change settings.

  • Page 34: Macintosh

    STEP 2 Installing the Driver & Software ® Macintosh For USB Interface Cable Users ® For Mac OS X 10.2.4 or greater Double-click the Start Here OSX icon to install. Important Follow the on-screen instructions. Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11.
  • Page 35 Installing the Driver & Software ® Macintosh ® ® ® For Mac OS X 10.2.4 to 10.2.8 users: To install Presto! PageManager , double-click Click Add. the Presto! PageManager icon and follow the on-screen instructions. Choose USB. Note ® ® When Presto! PageManager is installed OCR...

  • Page 36: For Wired Network Interface Users

    STEP 2 Installing the Driver & Software ® Macintosh For Wired Network Interface Users ® For Mac OS X 10.2.4 or greater Double-click the Start Here OSX icon to install. Important Follow the on-screen instructions. Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11.
  • Page 37 Installing the Driver & Software ® Macintosh The Océ software will search for the Océ When this screen appears, click OK. device. During this time the following screen will appear. ® For Mac OS X 10.3.x or greater users: The printer driver, scanner driver and ControlCenter2 have been installed and Note the installation is now complete.
  • Page 38 STEP 2 Installing the Driver & Software ® Macintosh Click Print Center, then Quit Print Center. The printer driver, scanner driver and ControlCenter2 have been installed and the installation is now complete. ® ® To install Presto! PageManager , double-click the Presto! PageManager icon and follow the on-screen instructions.

  • Page 39: For Wireless Network Interface Users In Infrastructure Mode

    The following steps will guide you through the configuration and installation process. To achieve optimum results with normal every day document printing, place the cx2100 as close to the network access point (router) as possible with minimal obstructions. Large objects and walls between the two devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
  • Page 40 STEP 2 Installing the Driver & Software ® Macintosh Confirm your network environment The setup process will be different depending on your network environment. Installation using SecureEasySetup™ . If your wireless access point (A) supports SecureEasySetup™ , you do not need to use a computer to configure the machine.

  • Page 41: Using The Secureeasysetup™ Software To Configure Your Machine For A Wireless Network

    ControlCenter2, continue to step 14 on configure the wireless settings again. page 42. Press Menu, 7, 2, 5 (or Menu, 7, 0) and then press 1 to accept the change. Place the cx2100 close to the SecureEasySetup™ router or access point.

  • Page 42: Using The Setup Wizard From The Control Panel Lan Menu For Wireless Network Configuration

    Make sure that you have finished the instructions from step 1 Setting Up the Machine on pages 4 through 11. These instructions will install your cx2100 in a typical Before you begin you must know your wireless small office or home wireless network environment in network settings.
  • Page 43 Installing the Driver & Software ® Macintosh Plug the AC power cord into an AC outlet. Turn Select <New SSID> using and press the power switch on. OK. Go to step 6. 72.WLAN SSID <New SSID> Improper Setup Select ab or OK If you have previously configured the wireless settings of the machine you must reset the Enter a new SSID and press OK.
  • Page 44 STEP 2 Installing the Driver & Software ® Macintosh Choose the appropriate key number and Your machine will now try to connect to your press OK. wireless network using the information you have entered. If successful, Connected will 72.WLAN appear briefly on the LCD. WEP key Connection NG is displayed when the print KEY1:...
  • Page 45 Installing the Driver & Software ® Macintosh Choose Wireless Network Connection, and • If this screen appears click OK. then click Next. ® Enter a name for your Macintosh in Display Name up to 15 characters long and click OK. Go to step 20.
  • Page 46 STEP 2 Installing the Driver & Software ® Macintosh When this screen appears, click OK. Click Print Center, then Quit Print Center. ® For Mac OS X 10.3.x or greater users: The printer driver, scanner driver and ControlCenter2 have been installed and the installation is now complete.

  • Page 47: For Network Users

    For Network Users ® BRAdmin Light utility (For Windows users) The BRAdmin Light is a utility for initial setup of Océ network connected devices. It also can search for Océ products on your network, view the status and configure basic network settings, such as IP address. Note If you require more advanced printer management, use the latest Océ...

  • Page 48: Bradmin Light Utility (For Mac Os ® X Users)

    Double-click the Macintosh HD icon on your desktop. The address information will be saved to the machine. Choose Library, Printers, Oce and then Utilities. Double-click the file BRAdmin Light.jar and run the software. BRAdmin Light will then search for new devices automatically.

  • Page 49: Web Based Management (Web Browser)

    For Network Users Web Based Management Restoring the network (web browser) settings to factory default The Océ print server is equipped with a web server To restore all network settings of the internal that allows you to monitor its status or change some Print/Scan server to factory default, please follow the of its configuration settings, using HTTP (Hyper Text steps below.

  • Page 50: Entering Text

    For Network Users Entering text When setting certain menu selections, such as the Station ID, you will need to type text characters. The dial pad keys have letters printed on them. The keys: 0, # and l do not have printed letters because they are used for special characters.

  • Page 51: Consumables And Options

    Consumables and Options Options The machine has the following optional accessories. You can expand the capabilities of the machine by adding these items. Lower Tray Unit DIMM Memory 6429909 The lower paper tray unit can hold up to 500 sheets of paper. You can expand the memory by installing a (144-pin When the lower tray unit is installed, the machine expands SO-DIMM) memory module.
  • Page 52 Trademarks Océ and the Océ logo are trademarks of Océ N.V., Registered in the U.S. Patent and Trademark Office and/ or other jurisdictions. BRAdmin Light and BRAdmin Professional are trademarks of Brother Industries, Ltd. Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation in the United States and other countries.
  • Page 53 Beyond the Ordinary Printing for Professionals Océ 100 Oakview Drive Trumbull, CT 06611 ©Océ 2008 www.oceusa.com All Rights Reserved...

Table of Contents