Table of Contents
Advertisement
User setting
5.2.4
03 Feed Tray Setting \ 02 Paper Feed Auto Selection
When the selected paper tray becomes empty while copying is in progress, automatic tray switching detects
the same copy paper size loaded in another tray to allow copying to continue without interruption. (Auto Tray
Switching: ATS)
Select the tray size setting to be detected when ATS functions. You may also select the priority of the
detection for each tray.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [01 System Setting], [03 Feed Tray Setting], and then [02 Feed Tray Auto Selection].
3
Touch to highlight the desired tray key under ATS/APS Switch.
The selected tray is automatically detected when ATS functions. The trays not selected will not be
detected even when ATS functions.
4
The selected tray will be displayed under Tray Priority as the tray key.
–
Touch to highlight the desired tray key under Tray Priority, then change its priority by using the arrow
keys (+) and (,).
5
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Feed Tray Setting Menu Screen will be restored.
6
If further changes are required, touch the desired key.
CS655 Pro
5
5-7
Advertisement
Table of Contents
