Fax Settings - Line Parameter Setting (Ip); Fax Settings - Header/Footer Position; Number Of Redials; Redial Interval - Oce VarioLink 2222c User Manual

10.5 Administrator Settings (IP/I-FAX)
10.5.7

Fax Settings - Header/Footer Position

Reference
- For IP Address Fax in the color mode, reception information is not available for [Outside Body Text].
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.
d
Reference
For the setting procedure, refer to page 10-16.
10.5.8

Fax Settings - Line Parameter Setting (IP)

Number of Redials

d
Reference
For the setting procedure, refer to page 10-18.

Redial Interval

d
Reference
For the setting procedure, refer to page 10-18.
10.5.9

Fax Settings - TX/RX Settings

Reference
- To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to [Auto].
- The available tray types vary depending on the options that are installed.
- To receive a fax in the color mode, documents are always recorded in full size for IP address fax, and
recorded after being reduced to the appropriate print paper size for Internet fax.
- To receive a fax in the color mode, Print Separate Fax Pages cannot be used.
d
Reference
For the setting procedure, refer to page 10-20.

10.5.10 Fax Settings - Function Settings

Function ON/OFF Setting - Destination Check Display Function

d
Reference
For the setting procedure, refer to page 10-22.

Memory RX Setting

d
Reference
For the setting procedure, refer to page 10-23.

10.5.11 Fax Settings - Report Settings

Activity Report

d
Reference
For the setting procedure, refer to page 10-28.
VL3622c/VL2822c/VL2222c
10
10-35