Punching Holes In Copies (Punch Settings) - Oce CS193 User Manual

Basic copy operations
3.12.5

Punching holes in copies (Punch settings)

!
Detail
In order for holes to be punched in the copies, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the original is positioned. If an Original
Direction setting is not selected, holes may not be punched in the copies as desired.
For details on specifying the original orientation, refer to "Selecting the original orientation (Original
Direction settings)" on page 3-24.
Note
The Punch settings are available only if the punch kit is installed on the optional finisher.
Paper weight
Plain paper (60 g/m
Thick paper 1/2 (91 g/m
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Under "Punch", touch [4-Hole].
CS193/CS173/CS163
Paper size
2 2
to 90 g/m ) A3 w, A4 v, B5 w
2 2
to 209 g/m )
3
3-75