Exit 2 Diverter Gate Removal - Lexmark X850e Service Manual

7500-XXX

Exit 2 diverter gate removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove two screws securing the upper guide assembly (A) to the exit 2 unit assembly.
4.
Remove the upper guide assembly (A).
Note: The exit 2 access handle (B) may become detached.
5.
Remove the spring (C) connecting the exit 2 diverter gate (D) to the upper guide assembly (A).
6.
Gently flex the mounting points securing the exit 2 diverter gate (D) to the upper guide assembly (A).
7.
Remove the exit 2 diverter gate (D)
D
Note: After reinstalling the upper guide assembly (A), ensure the exit 2 access handle (B) operates freely.
4-318
MFP Service Manual
"Exit 2 unit assembly removal" on page
Boss
A
A
4-315.
Front
B
C