Sensor (Exit 2) Static Jam - Lexmark X850e Service Manual

7500-XXX
Step
9 Perform a print test.
Does the error still occur?

203.03 Sensor (exit 2) static jam

Step
1 Check the media position.
Open the exit 2 left door assembly, and visually check it.
Does the media touch the sensor (exit 2)?
2 Check the sensor (exit 2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Media Path.
4. Touch Exit2.
Open the printer left door assembly and the exit 2 left
door assembly.
Does the display on the operator panel change every
time the actuator on the above sensor operates?
3 Check the sensor (exit 2) for proper connection.
Is the above sensor connected properly?
4 Perform a print test.
Does the error still occur?
5 Perform a print test.
Does the error still occur?
2-50
MFP Service Manual
Check
Check
Yes
Replace the printer Problem solved.
engine card
assembly.
Go to "Printer
engine card
assembly removal"
on page 4-117.
Yes
Remove the media. Go to step 2.
Go to step 4. Go to step 3.
Replace the sensor Replace the
(exit 2). connection.
Go to "Exit 2
sensor (exit 2)
removal" on
page 4-328.
Replace the exit Problem solved.
interface card
assembly.
Go to "Exit
interface card
assembly removal"
on page 4-116.
Go to step 5.
Replace the printer Problem solved.
engine card
assembly.
Go to "Printer
engine card
assembly removal"
on page 4-117.
No
No