2000-Sheet Dual Input (Ttm)-Tray Support Roll Removal - Lexmark X850e Service Manual

7500-XXX
2000-sheet dual input (TTM)–tray support roll removal
1.
Remove tray 3 assembly. See
page 4-217.
2.
Remove tray 4 assembly. See
page 4-216.
3.
Remove the foot cover. See
4.
Remove two screws securing the two brackets (A).
5.
Remove the two e-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
6.
Remove the two e-clips securing the tray support rolls (B) to the main frame.
D
7.
Remove the shafts (D).
4-214
MFP Service Manual
"2000-sheet dual input (TTM)–tray 3 assembly removal" on
"2000-sheet dual input (TTM)–tray 4 assembly removal" on
"2000-sheet dual input (TTM)–foot cover removal" on page
Front
B
E-ring
A
4-209.