Media Tray Assembly; Bottom Plate - Lexmark X850e Service Manual

7500-XXX

Media tray assembly

Media feed unit assembly
It is necessary to adjust the front and rear side guides in the media tray assembly to match the media size.
Front media guide / rear media guide
The front media guide can be adjusted to different media sizes by moving it to the front or rear. These guides
come into contact with the front and rear edges of the media and hold it in position.
The rear side guide moves together with the front side guide.

Bottom plate

The force pushing up the bottom plate of tray 3 is transmitted by the driving force of the media feed lift motor on
the media feed unit assembly to the media lift shaft assembly through the tray lift gear assembly 3. The bottom
plate is lifted up via the rear tray cables, front right cable and front left cable by the rotation of the tray lift shaft
assembly, which causes the supplied media to come into contact with the pick roll.
The force pushing up the bottom plate of tray 4 is transmitted to the tray lift shaft assembly through the tray lift
gear assembly 4. The bottom plate is lifted up via the front tray cables and rear tray cables by the rotation of the
tray lift shaft assembly, which causes the supplied media to contact the pick roll.
Tray 3 media tray assembly
Front media guide
1-60
MFP Service Manual
F/R lift cable
F/L lift cable
Rear lift cables
Rear media guide
Bottom plate