Lexmark X850e Service Manual page 129

Error code or
Error contents
message
928.00 PC cartridge RFID
communication failure
Service PC
cartridge
929.00 Sensor (ATC) failure
Service PC
cartridge
930.00 Laser power failure
Service
printhead
error
932.00 Toner cartridge RFID data
write failure
Toner
cartridge
933.00 Toner cartridge RFID
communication failure
Toner
cartridge
939.00 RIP card assembly
communication failure
Service RIP
engine
Comm.
941.00 Media tray 1 lift up / no tray
failure
Service tray 1
failure
942.00 Media tray 2 lift up / no tray
failure
Service tray 2
failure
943.00 Media tray 3 lift up / no tray
failure
Service tray 3
failure
Description/Action
A communication error occurred between the PC
cartridge RFID tag in the PC cartridge and the RFID
ASIC on the printer engine card assembly.
Go to "928.00 PC cartridge RFID communication
failure" on page 2-164.
The sensor (ATC) failed.
Go to "929.00 Sensor (ATC) failure" on
page 2-164.
Light intensity of the LD2 is less than the specified
value.
Go to"930.00 Laser power failure" on
page 2-164.
A data write error occurred on the toner cartridge
RFID tag in the toner cartridge.
Go to "932.00 Toner cartridge RFID data write
failure" on page 2-165.
A communication error occurred between the toner
RFID tag in the toner cartridge and the RFID ASIC
on the printer engine card assembly.
"933.00 Toner cartridge RFID
Go to
communication failure" on page
A communication error occurred between the printer
engine card and the RIP card assembly.
"939.00 RIP card assembly communication
Go to
failure" on page 2-166.
The media tray 1 sensor (media level) is not turned
on within the specified time after the tray 1 media
feed lift motor is turned on.
The media tray 1 switch (media size) detected no
media tray.
Go to "941.00 Media tray 1 lift up / no media tray
failure" on page 2-166.
The media tray 2 sensor (media level) is not turned
on within the specified time after the media tray 2
media feed lift motor is turned on.
The media tray 2 switch (media size) detected no
media tray.
Go to "942.00 Media tray 2 lift up / no media tray
failure" on page 2-168.
The tray 3 sensor (media level) is not turned on
within the specified time after the tray 3 media feed
lift motor is turned on.
The tray 3 switch (media size) detected no tray.
TTM equipped machines, go to
up / no tray failure" on page
2TM equipped machines, refer to the Options
Service Manual.
7500-XXX
2-165.
"943.00 Tray 3 lift
2-169.
2-31
Diagnostic information