Rear upper cover removal
1.
Remove the scanner interface cable assembly (A).
2.
Remove the ADF interface cable assembly (B).
3.
Remove the rear RIP card cover. See
4.
Remove the controller box side cover. See
5.
Remove the rear motor cover. See
6.
Remove the four screws securing the rear upper cover (C) to the machine.
B
"Rear RIP card cover removal" on page
"Controller box side cover removal" on page
"Rear motor cover removal" on page
A
Rear
4-11.
7500-XXX
4-13.
4-18.
4-15
Repair information