2000-Sheet Dual Input (Ttm)-Tray 4 Media Guide Rack And Pinion Removal - Lexmark X850e Service Manual

2000-sheet dual input (TTM)–tray 4 media guide rack and pinion removal
1.
Remove the tray 4 assembly. See
page 4-216.
2.
Place the tray 4 assembly on its right side, as shown in the figure.
3.
Remove two e-clips securing the two pinion gears (A) to the frame assembly (B).
4.
Remove two pinion gears (A).
E-ring
5.
Remove four screws securing the two rack gears (C) to the frame assembly (B).
"2000-sheet dual input (TTM)–tray 4 assembly removal" on
C
E-ring
A
A
B
C
Repair information
7500-XXX
4-235