Switch (Main Power) Removal - Lexmark X850e Service Manual

Switch (main power) removal

1.
Remove the top cover assembly. See
2.
Open the printer front door assembly.
3.
Remove the right upper cover. See
4.
Remove the screw securing the bracket (A).
5.
Slide the bracket (A) to the side and then upward in the direction of the arrow.
6.
Remove the bracket (A).
7.
Disconnect the four connectors from the switch (main power) (B).
Note: Make note of the proper location of the four connectors.
8.
Release the hooks securing the switch (main power) (B) to the bracket (A).
9.
Remove the switch (main power) (B).
Note: Before reinstalling, ensure the four connectors are plugged into their proper location to prevent damage.
"Top cover assembly removal" on page
"Right upper cover removal" on page
B
Hook
A
Connectors
7500-XXX
4-5.
4-9.
Hook
Notch
Front
4-115
Repair information