Exit 2 Sensor (Exit 2) Removal - Lexmark X850e Service Manual

7500-XXX

Exit 2 sensor (exit 2) removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove the exit 2 left cover. See
4.
Remove the exit 2 right cover. See
5.
Disconnect the connector from the sensor (exit 2) (A).
6.
Pull the exit 2 sensor (actuator) (B) back in the direction of the arrow.
7.
Release the hooks securing the sensor (exit 2) (A) to the exit 2 unit assembly.
8.
Remove the sensor (exit 2) (A).
4-328
MFP Service Manual
"Exit 2 unit assembly removal" on page
"Exit 2 left cover removal" on page
"Exit 2 right cover removal" on page
A
Hook
4-319.
4-320.
Connector
B
4-315.
Front