Ac Drive Card Assembly Removal - Lexmark X850e Service Manual

7500-XXX

AC drive card assembly removal

1.
Remove the RIP card chassis bracket. See
2.
Remove the controller box side cover. See
3.
Remove all harnesses from the clamps on the controller cage (A).
4.
Remove the six screws securing the controller cage (A) to the printer.
5.
Move the controller cage (A) leftward and outward.
6.
Remove the controller cage (A).
7.
Remove the seven connections to the AC drive card assembly (B).
8.
Remove the six screws securing the AC drive card assembly (B) to the printer.
Note: Connectors P1, P4, P6, and P7 have a hook that must be released.
4-122
MFP Service Manual
"RIP card chassis bracket removal" on page
"Controller box side cover removal" on page
Rear
4-127.
4-18.
A
Clamp
Clamp