Sensor (Adf Width Aps 1) Static Jam - Lexmark X850e Service Manual

7500-XXX
Step
15 Place an undamaged document in the ADF, and perform
a ADF test.
Does the error remain?

290.21 Sensor (ADF width APS 1) static jam

Step
1 Check the sensor (ADF width APS 1).
Is the feed media path free of media or media fragments?
2 Check the sensor (ADF width APS 1) for operation.
Perform the sensor (ADF width APS 1) test.
Open the ADF left cover assembly.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Touch ADF width APS 1.
Operate the actuator of the sensor (ADF width APS 1).
Does the display on the operator panel change every time
the sensing area of the above sensor is blocked?
3 Check the sensor (ADF width APS 1) for connection.
Is the above sensor connected properly?
4 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
5 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
2-106
MFP Service Manual
Check
Check
Yes
Replace the Problem solved.
RIP card
assembly.
Go to "RIP
card assembly
removal" on
page 4-128.
Yes
Go to step 2. Remove any
media or media
fragments.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (ADF connection.
width APS 1).
Go to "Sensor
(ADF width APS
1)" on
page 4-184.
Replace the ADF Go to step 5.
controller card
assembly.
Go to "ADF
controller card
assembly
removal" on
page 4-167.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-128.
No
No