Sensor (Exit 1 Bin Full) Removal - Lexmark X850e Service Manual

Sensor (exit 1 bin full) removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the rear upper cover. See
4.
Open the printer left door assembly.
5.
Remove the exit 2 unit assembly. See
6.
Open the printer front door assembly.
7.
Remove the printer front left cover. See
8.
Remove the exit 1 media shift assembly. See
9.
Release the hooks securing the sensor (exit 1 bin full) (A) to the exit 1 media shift assembly (B).
10.
Remove the sensor (exit 1 bin full) (A).
Hook
"Rear motor cover removal" on page
"Rear upper cover removal" on page
Hooks
A
"Rear RIP card cover removal" on page
"Exit 2 unit assembly removal" on page
"Printer front left cover removal" on page
"Exit 1 media shift gear removal" on page
B
Left
7500-XXX
4-13.
4-11.
4-15.
4-315.
4-3.
4-110.
4-109
Repair information