Exit 2 Actuator Removal - Lexmark X850e Service Manual

Exit 2 actuator removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove the exit 2 left cover. See
4.
Remove the exit 2 right cover. See
5.
Release the spring (A) on the exit 2 actuator (B).
6.
Move the exit 2 actuator (B) to the right in the direction of the arrow to release two hooks.
7.
Remove the exit 2 actuator (B).
8.
Remove the spring (A) from the exit 2 actuator (B).
Note: Before reinstalling the exit 2 actuator (B), ensure the spring (A) is properly installed.
"Exit 2 left cover removal" on page
"Exit 2 right cover removal" on page
B
A
"Exit 2 unit assembly removal" on page
A
Front
4-315.
4-319.
4-320.
B
Repair information
7500-XXX
4-323