Exit 2 diverter gate removal
1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove two screws securing the upper guide assembly (A) to the exit 2 unit assembly.
4.
Remove the upper guide assembly (A).
Note: The exit 2 access handle (B) may become detached.
5.
Remove the spring (C) connecting the exit 2 diverter gate (D) to the upper guide assembly (A).
6.
Gently flex the mounting points securing the exit 2 diverter gate (D) to the upper guide assembly (A).
7.
Remove the exit 2 diverter gate (D)
D
Note: After reinstalling the upper guide assembly (A), ensure the exit 2 access handle (B) operates freely.
Exit 2 left cover removal
"Exit 2 unit assembly removal" on page
Boss
A
A
7500-432, -632, and -832
4-322.
Front
B
C
Repair information
Previous
Next
Go Back
4-325