Booklet Diverter Gate Removal - Lexmark C950 Service Manual

Remove the four screws securing the booklet controller card assembly (A).
6.
7. Remove the booklet controller card assembly (A).

Booklet diverter gate removal

1. Remove the rear upper cover. See
Remove the two screws securing the booklet diverter gate (A) to the machine.
2.
Remove the booklet diverter gate (A).
3.
Release the harness from the clamp.
4.
Rear
"Rear upper cover removal" on page
5058-030
A
4-309.
Repair information
4-251
Previous
Next
Go Back