Tray Lift One Way Clutch / Gear Assembly Removal - Lexmark X850e Service Manual

Tray lift one way clutch / gear assembly removal

1.
Remove the media feed unit assembly. Go
"Media feed unit assembly 2 removal" on page
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5.
Remove the tray lift one-way clutch (B).
Clamp
Harness
A
Rear
to"Media feed unit assembly 1 removal" on page 4-20
4-23.
Washer
7500-XXX
or
B
4-35
Repair information