Printhead Assembly Removal - Lexmark X850e Service Manual

Printhead assembly removal

1.
Remove the top cover assembly. See
2.
Open the printer front door assembly. See
3.
Remove the PC cartridge.
4.
Remove the toner cartridge.
5.
Remove the printer front door assembly. See
6.
Remove the front inner cover. See
7.
Remove the toner cartridge guide assembly. See
page 4-95.
8.
Disconnect the three connectors from the printhead assembly (A).
9.
Disconnect the connector from the junction harness.
10.
Remove the four screws securing the printhead assembly (A).
11.
Remove the printhead assembly (A) by lifting it upward.
"Top cover assembly removal" on page
"Front inner cover removal" on page
A
"Printer front door assembly removal" on page
"Printer front door assembly removal" on page
"Toner cartridge guide assembly removal" on
Rear
4-5.
4-6.
4-8.
Connectors
Junction harness
Front
Repair information
7500-XXX
4-6.
4-99