Sensor (Pre-Feed) Removal - Lexmark X850e Service Manual

Sensor (pre-feed) removal

1.
Remove the appropriate media feed unit assembly. See
page 4-20
2.
Release the hook securing the sensor (pre-feed) (A).
3.
Remove the sensor (pre-feed) (A) from the feed unit front guide (B).
4.
Disconnect the connector from the sensor (pre-feed) (A).
5.
Remove the sensor (pre-feed) (A).
or "Media feed unit assembly 2 removal" on page
Hook
A
"Media feed unit assembly 1 removal" on
4-23.
Front
B
7500-XXX
4-41
Repair information