7500-XXX
The entire process is complete when the progress bar appears completely shaded and the percentage indicator
shows 100%. After completion, the panel returns to Disk Encryption.
Wipe Disk
This setting provides you with a tool for erasing the contents of a disk.
Warning: Wipe Disk removes a disk's data in such a way that it cannot be recovered.
To change this setting:
1.
Touch Wipe Disk from the Configuration Menu.
Note: If an advanced password has been established, you must enter this password in order to change the
setting. If no advanced password exists, you can establish one by using the keyboard that appears on the LCD.
Touch Wipe disk now. Contents will be lost. Continue? appears on the LCD.
2.
3.
Touch Back to cancel and return to the Configuration Menu.
3-46
MFP Service Manual
Formatting Disk
2/2
0%
DO NOT
POWER OFF