Top cover assembly removal
Note: First remove the bridge unit and finisher, if equipped.
1.
Remove the operator panel assembly. See
2.
Remove the printer front door assembly. See
3.
Remove the printer front left cover. See
4.
Remove two screws securing the top cover assembly (A).
5.
Remove the top cover assembly (A) by sliding it to the right and then forward in the direction of the arrow.
"Operator panel assembly removal" on page
"Printer front door assembly removal" on page
"Printer front left cover removal" on page
A
Front
7500-XXX
4-136.
4-6.
4-3.
4-5
Repair information