2000-Sheet Dual Input (Ttm)-Tray 3 Lift Gear Assembly Removal - Lexmark X850e Service Manual

2000-sheet dual input (TTM)–tray 3 lift gear assembly removal
1.
Remove the rear cover. See
2.
Remove the media feed unit 3 assembly. See
assembly removal (tray 3)" on page
3.
Release the harness from the clamp of the tray 3 lift gear assembly (A).
4.
Remove two screws securing the tray 3 lift gear assembly (A).
5.
Remove the tray 3 lift gear assembly (A).
Clamp
"2000-sheet dual input (TTM)–rear cover removal" on page
"2000-sheet dual input (TTM)–media feed unit
4-243.
Clamp
A
7500-XXX
4-212.
4-271
Repair information