7500-XXX
AC power input socket assembly removal
1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the rear lower cover. See
4.
Remove the top cover assembly. See
5.
Remove the right upper cover. See
6.
Remove the three screws securing the AC power input socket assembly (A).
7.
Release the harness from the clamp.
8.
Remove the AC power bracket assembly (A).
Warning: Before reinstalling, ensure all connectors are plugged into their proper location to prevent
damage.
4-124
MFP Service Manual
"Rear RIP card cover removal" on page
"Rear motor cover removal" on page
"Rear lower cover removal" on page
"Top cover assembly removal" on page
"Right upper cover removal" on page
A
4-13.
4-11.
4-12.
4-5.
4-9.
Rear