7500-XXX
Sensor (RFID PC cartridge) and sensor (RFID toner cartridge) removal
Note: This removal applies to the sensor (RFID PC cartridge) (A) and the sensor (RFID toner
cartridge) (B).
1.
Remove the top cover assembly. See
2.
Remove the toner cartridge guide assembly. See
page
4-95.
3.
Disconnect the connector from the sensor (RFID PC cartridge) (A) or the sensor (RFID toner cartridge) (B).
4.
Release the hooks securing the sensor (RFID PC cartridge) (A) or the sensor (RFID toner cartridge) (B).
5.
Remove the sensor (RFID PC cartridge) (A) or sensor (RFID toner cartridge) (B) by sliding it out in the
direction of the arrow.
Note: the sensor (RFID PC cartridge) (A) and sensor (RFID toner cartridge) (B) require moderate force to
remove.
4-94
MFP Service Manual
"Top cover assembly removal" on page
"Toner cartridge guide assembly removal" on
A
B
Front
4-5.