Small Platen Glass Removal - Lexmark X850e Service Manual

Small platen glass removal

1.
Remove the ADF unit assembly. See
2.
Remove the operator panel assembly. See
3.
Remove the scanner left cover. See
4.
Remove the scanner right cover. See
5.
Remove the scanner top rear cover. See
6.
Remove the screw securing the small platen glass front retainer (A) to the scanner unit assembly.
7.
Remove the small platen glass front retainer (A).
8.
Remove the screw securing the small platen glass rear retainer (B) to the scanner unit assembly.
9.
Remove the small platen glass rear retainer (B).
10.
Remove the small platen glass (C).
Warning: Do not drop the small platen glass (C), or damage will occur.
CAUTION: Avoid touching the underside of the small platen glass (C).
Note: Before reinstalling the small platen glass (C), clean the underside of the small platen glass (C) with
glass cleaner, then install the small platen glass assembly (C). After installation, clean the top of the small
platen glass (C) with glass cleaner.
A
"ADF unit assembly removal" on page
"Operator panel assembly removal" on page
"Scanner left cover removal" on page
"Scanner right cover removal" on page
"Scanner top rear cover removal" on page
B
C
7500-XXX
4-159.
4-136.
4-134.
4-135.
4-133.
4-145
Repair information