2000-sheet dual input (TTM)–tray 4 front cables removal
1.
Remove the tray 4 assembly. See
page
4-216.
2.
Remove the tray 4 front cover. See
page
4-228.
3.
Place the tray 4 assembly on its right side, as shown in the figure.
4.
Remove the E-clip with a prying tool securing the front tray lift pulley (A) to the tray lift shaft assembly (B).
5.
Remove the front tray lift pulley (A).
Note: The tray 4 front cables (C) become detached.
6.
Remove the tray 4 front cables (C) from the tray lift shaft assembly (B).
"2000-sheet dual input (TTM)–tray 4 assembly removal" on
"2000-sheet dual input (TTM)–tray 4 front cover removal" on
7500-XXX
4-233
Repair information