Lexmark X850e Service Manual page 547

Hide thumbs Also See for X850e:

Table of Contents

Remove the harness from the rectangular opening of the side of the ADF left cover assembly.

Note: Before reinstalling the ADF left cover assembly (E), ensure that the harness is properly routed and is

not pinched.

Note: Ensure that the harnesses are properly captured by the harness guide (I).

Note: Ensure that the green ground wire (G) and the grounding plate (H) is reconnected.

Note: Ensure that the ADF left cover assembly (E) opens and closes without binding.

Note: Ensure that the spring (K) attached to the feed/pick roll assembly (L) is properly reinstalled.

Repair information

Chapters

Table of Contents