Exit 2 Sensor (Exit 2 Media Shift Hp) Removal - Lexmark X850e Service Manual

Exit 2 sensor (exit 2 media shift HP) removal

1.
Remove the exit 2 unit assembly. See
2.
Open the exit 2 unit assembly.
3.
Remove the exit 2 left cover. See
4.
Remove the exit 2 right cover. See
5.
Remove the exit 2 media shift gear. See
6.
Rotate the shift assembly (A) upward in the direction of the arrow.
7.
Disconnect the connector from the sensor (exit 2 media shift HP) (B).
8.
Release the hooks securing the sensor (exit 2 media shift HP) (B) to the exit 2 unit assembly.
9.
Remove the sensor (exit 2 media shift HP) (B).
"Exit 2 unit assembly removal" on page
"Exit 2 left cover removal" on page
"Exit 2 right cover removal" on page
"Exit 2 media shift gear removal" on page
Hooks
LOW CHUTE
Rear
4-319.
4-320.
Connector
B
7500-XXX
4-315.
4-326.
A
4-329
Repair information