Transport Motor Stop Failure - Lexmark X850e Service Manual

Step
2 Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?

910.00 Transport motor stop failure

Step
1 Check the dual drive motor assembly installation.
Is the dual drive motor assembly properly installed?
Open the rear motor cover and check it.
2 Check the dual drive motor assembly rotation operation.
Open the rear motor cover and check it.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Transport motor.
Does the motor rotate normally?
3 Check the dual drive motor assembly connection.
Is the dual drive motor assembly properly connected?
4 Perform a print test.
Does the error continue?
Check
Check
Yes
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-117.
Yes
Go to step 2. Install the PC
cartridge properly.
Go to step 4 Go to step 3.
Replace the dual Replace the
drive motor connection.
assembly.
Go to "Dual drive
motor assembly
removal" on
page 4-113.
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-117.
Diagnostic information
7500-XXX
No
No
2-153