Paper Prompts; Envelope Prompts; Jobs On Disk; Disk Encryption - Lexmark X850e Service Manual

Paper Prompts

When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting
controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual Paper.
To change this setting:
1.
Touch Paper Prompts from the Configuration Menu.
touch-screen.
2.
Touch or
3.
To exit this screen without changing the setting's value, touch Back.
4.
To save the setting's new value, touch Submit.

Envelope Prompts

This setting controls the tray the user is directed to refill when specific envelope size is out. The selections are
Auto (default), MP Feeder, and Manual Env.
To change the value of this setting:
1.
Touch Env Prompts from the Configuration Menu.
screen.
2.
Touch or
3.
To exit this screen without changing the setting's value, touch Back.
4.
To save the setting's new value, touch Submit.

Jobs On Disk

Jobs On Disk allows you to delete buffered jobs saved on the disk.
To delete jobs saved on the disk:
1.
Touch Jobs On Disk from the Configuration Menu.
2.
Touch Delete to decrease the setting's value; touch
3.
Touch Back to cancel and return to the Configuration Menu.

Disk Encryption

This setting determines if the printer encrypts the information that it writes to the hard disk. The values are
Disable and Enable.
Warning: If the value is changed from Enable to Disable or from Disable to Enable, then the printer
completely formats the hard disk. All information on the disk will be unrecoverable.
To change this setting:
1.
Touch Disk Encryption from the Configuration Menu.
Note: If an advanced password has been established, you must enter this password in order to change the
setting. If no advanced password exists, you can establish one by using the keyboard that appears on the LCD.
2.
Touch Submit to save the change.
3.
Touch Back to cancel and return to the Configuration Menu.
If you remove an encrypted disk from a device and then try to install another disk, Disk Corrupted.
Reformat? appears on the LCD. You can format the newly installed disk or remove it from the device.
to scroll through the setting's other possible values.
to scroll through the setting's possible values.
[setting's current value]
[setting's current value]
to increase the setting's value.
7500-XXX
appears on the
appears on the touch-
3-43
Diagnostic aids