Ac Power Input Socket Removal - Lexmark X850e Service Manual

AC power input socket removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the rear lower cover. See
4.
Remove the three screws securing the bracket (A).
5.
Disconnect the two connectors to the AC power input socket (B).
6.
Remove the two screws securing the AC power input socket (B) to the bracket (A).
7.
Remove the AC GFI breaker (B).
Warning: Before reinstalling, ensure all connectors are plugged into their proper location to prevent
damage.
"Rear RIP card cover removal" on page
"Rear motor cover removal" on page
"Rear lower cover removal" on page
A
B
7500-XXX
4-13.
4-11.
4-12.
Rear
4-125
Repair information