Tools Required For Service - Lexmark X850e Service Manual

Exit 2 transport roll assembly and media exit roll assembly
The exit 2 transport roll assembly and exit 2 media exit roll assembly are rollers used to eject media to the exit 2
standard bin or to feed media to the duplex.
Exit 2 media exit roll asm
Exit interface
card asm
Media shift motor
Rear

Tools required for service

Flat-blade screwdriver
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic short-blade
Needle nose pliers
Diagonal side cutters
Spring hook
Analog or digital multi meter
Parallel wrap plug 1319128
Twinax/serial debug cable (#1381963)
Coax/serial debug cable (#1381964)
5.5 mm hexdriver (magnetic)
Sensor (exit 2 media shift HP)
Exit 2 drive motor
Sensor (standard bin full exit 2)
Exit 2 media transport roll asm
7500-XXX
Sensor (exit 2)
Switch (exit 2 left
door interlock)
1-73
General information