Lexmark X850e Service Manual page 114

7500-XXX
Error code or
message
244.02
Paper jam
Check areas
B, C
244.03
Paper jam
Check area B
244.04
Paper jam
Check area
tray 4
244.05
Paper jam
Check areas
C, tray 4
245.00
Paper jam
Check area K,
tray 5
245.01
Paper jam
Check area K
245.02
Paper jam
Check area B
245.03
Paper jam
Check area K
250.00
Paper jam
Check areas
A, MPF
2-16
MFP Service Manual
Error contents
Sensor (tray 2 feed-out) on
jam (tray 4 media feed)
Sensor (registration) on jam
(tray 4 media feed)
Sensor (pre-feed) on jam
(tray 4 media feed)
Sensor (tray 4 feed-out) static
jam
Sensor (tray 5 feed-out) on
jam
Sensor (tray 2 feed-out) on
jam
Sensor (registration) on jam
Sensor (tray 5 feed-out) static
jam
Sensor (registration) on
jam (MPF pick)
Description/Action
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (tray 4 feed-out)
is turned on.
TTM equipped machines, go to
(tray 2 feed-out) on jam (tray 4 media feed)" on
page 2-79.
2TM equipped machines, refer to the Options
Service Manual.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 4 feed-out) is
turned on.
TTM equipped machines, go to
(registration) on jam (tray 4 media feed)" on
page 2-81.
2TM equipped machines, refer to the Options
Service Manual.
The sensor (pre-feed) is not turned on within the
specified time after the tray 4 feed lift motor is
turned on.
TTM equipped machines, go to
(pre-feed) on jam (tray 4 media feed)" on
page 2-82.
2TM equipped machines, refer to the Options
Service Manual.
Media remains on the sensor (tray 4 feed-out).
TTM equipped machines, go to
(tray 4 feed-out) static jam" on page
2TM equipped machines, refer to the Options
Service Manual.
The sensor (tray 5 feed-out) is not turned on with in
the specified time after the HCF feed lift motor is
turned on.
Refer to the Options Service Manual.
The sensor (tray 2 feed-out) on the printer is not
turned on within the specified time after the HCF
feed lift motor is turned on.
Refer to the Options Service Manual.
The sensor (registration) on the printer is not turned
on within the specified time after the HCF feed lift
motor is turned on.
Refer to the Options Service Manual.
Paper remains on the sensor (tray 5 feed-out).
Refer to the Options Service Manual.
The sensor (registration) is not turned on within the
specified time after the MPF pick solenoid is turned
on.
Go to "250.00 Sensor (registration) on jam (MPF
pick)" on page 2-85.
"244.02 Sensor
"244.03 Sensor
"244.04 Sensor
"244.05 Sensor
2-84.