Rip Card Chassis Bracket Removal - Lexmark X850e Service Manual

RIP card chassis bracket removal

1.
Remove the rear RIP card cover. See
2.
Disconnect five connections from the RIP card assembly (A).
3.
Remove the two screws securing the RIP card chassis bracket (B) to the frame.
4.
Slide the RIP card chassis bracket (B) to the left and out of the frame.
Warning: Do not drop the RIP card chassis bracket, or damage will occur.
Connectors
Connector
B
"Rear RIP card cover removal" on page
Connectors
A
7500-XXX
4-13.
4-127
Repair information