7500-XXX
Exit 2 unit docking lever removal
1.
Remove the exit 2 unit assembly. See
2.
Remove the two exit 2 unit docking levers (A) with a prying tool from the brackets (B).
Note: When removing the two exit 2 docking levers, ensure the brackets (B) are not bent or deformed.
3.
Remove the springs (C) from the brackets (B).
Exit 2 left door handle removal
4-316
MFP Service Manual
"Exit 2 unit assembly removal" on page
A
C
B
B
A
C
4-315.