Exit 1 Drive Belt Removal - Lexmark X850e Service Manual

7500-XXX

Exit 1 drive belt removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the exit 2 unit assembly. See
4.
Release the hook on the drive belt flange (A).
5.
Remove the drive belt flange (A).
6.
Remove the exit 1 drive belt (B) from the drive pulley - 25 tooth (C).
Note: The drive pulley -25 tooth (C) may become detached.
7.
Remove the exit 1 drive belt (B) from the exit 1 media shift assembly (D).
Note: Press on the exit 1 drive belt (B) while slowly turning the motor (E) by hand.
4-112
MFP Service Manual
"Rear RIP card cover removal" on page
"Rear motor cover removal" on page
"Exit 2 unit assembly removal" on page
B
D
Left side view
B
C
Hook
A
E
Rear
4-13.
4-11.
4-315.